How To Fix HP Computer Overheating Issue?
One of the most common issues with the computers is overheating problem that can lead you to the various issues and random shutdowns. The same problem is reported by the HP computer’s users as the problems occurred due to the blocked heat sink on the central processing unit. There are various methods that can help you to resolve the problems on your own or you can dial HP Customer Service Number to get instant support for the overheating issues.
Here you can find the steps mentioned below to resolve the overheating issue with HP computer-
Before opening the case you need to unplug your computer device.
Then you need to remove the small CPU fan plug from the motherboard
After this completely remove the CPU cooling fan. It may be located on the motherboard by four Phillips screws or a lock-down lever
Further, you have to release the CPU
Then after following the procedure clean out the heat sink. Blast compressed air directly on the heat sink
You need to wipe off any residual thermal paste very slightly and carefully. Use a clean cotton bud or paper towel
Here you have to replace the CPU in its socket
Next, you need to apply a thin layer of thermal paste to the top of the CPU. Don’t use a much amount as it cause overheating problems all over again
Further, swap the heat sink and clip the clip back in and secure the fan back on.
Plug it back into the motherboard
Make sure stray wires are secured away from fans, then put the cover back in place
After completing the whole procedure, test your computer to make sure everything works
In case you face any sort of difficulty while performing the procedure, give a call on our toll-free HP Technical Support Phone Number – (1-877-213-5868), where you will be assisted by the technical specialist who is highly knowledgeable and is dedicated to handling all sort of problems related to HP computers. You can also reach our support through online chat and invoice email at very affordable charges.
View Source: https://wp.me/p8Ba6k-c1
Comments